Introducing the new SimpeS Q.C. feature

The next major release of SimpeS (probably the 1.7) will introduce the new quality control feature. This feature, commonly used in production and testing environment, allows to control and verify the quality of a given device, assuring that the measured values being inside a predefined tolerances.

 

simpes_qc_s

 

The QC panel on the left, is divided in 4 main areas:

Info Area: Gives informations about QC test and D.U.T.

simpes_qc_1_s

 

 

 

 

 

 

Control Area: Allows to start stop and restart QC procedure.

simpes_qc_2_s

Overall Result Area: Display the last test result and informations about the test session.

simpes_qc_3s

Detailed Stats Area: Display detailed informations about the results of the test session.

simpes_qc_4_s

 

The QC procedure verify that the impedance modulus stays inside an upper and a lower data limit defined by the user. The procedure can also check a set of Thiele and Small parameters, and calculate their averages.

 

simpes_qc_setup

 

Data limits can be drawn and edited with a few click in an easy and intuitive “visual mode”

simpes_qc_lim

 

 

The new “zoom area” feature can also be helpful to draw data limit or to take a closer look to your measures.

simpes_qc_zm

watch the QC procedure in action